INTEGRAL-MA3004 DAS Audio

Audio matrix amplifier (4CH), 4IN x 4OUT (analog audio) + 4×4 DANTE I/O, 750 W, dual priority per output, ALMA™ control

  • Power per channel at 4 ohms: 750 W
  • Number of channels: 4
  • Digital Audio: DANTE / AES67
SKU: INTEGRAL-MA3004 Categories: , , Tag: Brand:

Description

Product description

The INTEGRAL-MA3004 is a 2U rack-mount matrix amplifier designed for permanent installation applications. It delivers 4 x 750 W at 4 ohms and integrates a powerful DSP engine with 4 analog inputs, 4 amplified outputs, and 4×4 DANTE digital audio networking, enabling flexible and scalable system configurations.
 
Control, configuration, and monitoring are managed via ALMA™ software or ALMAweb over IP networks, as well as through third-party systems using OSC (Open Sound Control). DANTE audio channels can be processed internally and routed back into the network when required. The amplifier supports both low impedance and high impedance (70V/100V) systems, ensuring compatibility with a wide range of installation scenarios.
 
The unit incorporates a full matrix architecture with advanced routing and priority management capabilities, allowing it to operate as a central control element within the system. Internal memory supports more than 100 global presets and over 200 output channel presets, including optimized configurations for DAS AUDIO systems. Each output channel can be configured independently, enabling tailored system setups across multiple zones or speaker models.
 
Local operation is available via a 1.54″ OLED display with rotary controls, providing intuitive access to essential parameters such as input and output levels, preset recall, mute, source selection, link management functions, and priority settings. Signal level monitoring is also available directly from the front panel.
 
For external integration, the INTEGRAL-MA3004 includes a GPIO (General Purpose Input/Output) interface with 3.3V logic level, ground connection, and eight configurable pins via ALMA™, facilitating control from external devices.
 
Two of the analog inputs can be configured as microphone inputs with 12V phantom power. The unit also integrates an Ethernet switch for daisy-chain network connections, eliminating the need for external switches. In addition, Wi-Fi and Bluetooth connectivity enable direct wireless operation via ALMAweb.

Output Power Ratings

Amplifier Channels
4
Power 8 Ohms
4 x 400 W
Power 8 Ohms Bridged
2 x 1500 W
Power 4 Ohms
4 x 750 W
Power 4 Ohms, Bridged
2 x 1500 W
Power 2 Ohms
4 x 750 W
Power 100 V
2 x 1500 W
Power 70 V
2 x 1200 W

Electronics and Audio

Amplifier Output Circuitry
Class D
Frequency Response
20 Hz-30 kHz (+0 – 0.5 dB)
Input Sensitivity
+20 dBu
Max Input Level
+22 dBu
Voltage gain
17.5 dB
Controls
Power On/Off, Navigation knobs
Display
OLED 1.54″
Cooling
Side-Right-to-Left
Amplifier Protections
Short Circuit, DC Ouput, Temperature, Over/Under Voltage
LED Indicators
On, Comms, Signal, Protect
Sampling Rate
48 kHz

Connectors

Analog Audio Input Connectors
2 x 3.5 mm Pitch Terminal Block
DANTE Digital In/Out Connectors
2 x RJ45 Fast Ethernet
Speaker Output Connector
Terminal Block

Power

AC Input Connector
IEC
Power Supply
Universal Mains Switch Mode
Operating Range
90-250 VAC
Current Draw 230 V / 115 V
3.0 A / 6.0 A

DSP

Analog Input Channels
4
Analog Output Channels
4
DANTE Input Channels
4
DANTE Output Channels
4
AD Converters
24 Bit @ 48 kHz 118 dBA Dynamic Range
DA Converters
24 Bit @ 48 kHz 118 dBA Dynamic Range
Internal Precision
32 Bit, 64 Bits Double Precission
Latency
1 ms
Delay
50ms per input / 120ms per output
Equalizer
Bell, Lo/Hi-Shelving, Hos
Crossover
Linkwitz-Riley, Butterworth, Bessel
High and Low Pass Filters
Up to 48 dB/oct
Limiters
RMS, Peak
Load Monitoring
Yes

Dimensions-Weight

Dimensions ( H x W x D )
88 x 483 x 208 mm3,5 x 19,0 x 8,2 in
Net Weight
5,2 kg ( 11,5 lb )

Shipping

Carton Dimensions ( H x W x D )
170 x 530 x 315 mm6,7 x 20,7 x 12,4 in
Shipping Weight
6,0 kg ( 13,2 lb )

There are no reviews yet.

Be the first to review “INTEGRAL-MA3004 DAS Audio”

Your email address will not be published. Required fields are marked *